I was assembling several buildings for an in-town fight, and since Himmelveil isn't ready yet (hint! hint! ), I used VW. I wanted to make a couple of the small houses where the upper floor overhangs slightly, but the base, roof, and upstairs all seem to be sized wrong to fit together.

Was there a patch at some point, or am I just screwing something up? Did anyone else run into this problem?

I haven't run into scaling issues on any other VW files, but my copy of Adobe Reader has been acting weird lately. I probably need to upgrade to a newer version (running 5).

Bighara -

I've done a lot of all the VW buildings, and haven't experienced any problems with any of them, scale-wise.

Remember something on the small plaster building, though. The top floor overhangs the bottom by a good half inch, and the room is designed to go on the top floor. That might be part of your problem.

I did a one story small plaster, but had to cut the roof down a little to match.

Acrobat Reader 7 is none too shabby, though it has features that I will never use. (Having reader recite a document aloud is of dubious merit...)

The program seems faster, and reads the older documents without problem, though some people have had difficulties with older DRM protected documents.

The Auld Grump

This is most likely due to user error of some kind.

*putting my hands over my head to protect my noggin from the shower of stones likely to fall my way now, but of course that leaves my crotch exposed*