OK so I have begun work on this and just wanted to put up an open forum with status and progress. I started this maybe 18 months ago, and work on it a little here and there. Things have lightened up for me a little, so I am making use of the time and crunching out as much of this as I can.
The intent of this is not to reskin at 300dpi. I don't have that skill
I am taking the 200dpi Mayhem Industrial files, and kitbashing them into TLX format.What I have Currently Done
Concrete Floors
3"x3" tiles, 1" grid in anchored and anchorless
3"x6" tiles, 1" grid in anchored and anchorless
6"x6" tiles, 1" grid in anchored and anchorless
(1.5" grid and gridless will be easy to do)
6" Walls
Loading Dock (brown outside, white inside with doors
Windows (brown outside, white inside)
[*]I also did one set with three across...just a single row, placed high on the wall.
Windows with Schedule Board (brown outside, white inside with board)
Outside Door/Window (Brown outside, white inside, double doors and one window)
[*]this may be better if I make the door into a 3" section and the window into a 3" section,
Windows - the standard windows for the Industrial set are 3 across by 5 down.
Inside/Outside wall - three iterations
[*]blank outside, blank inside
[*]blank outside, fire extinguisher inside
[*]blank outside, fire extinguisher and ladder inside
Office/Outside - with a coatrack, cabinet and fire extinguisher inside
Office/Outside Windows - with a pie chart poster between the windows
Office/Inside - with a coatrack, cabinet and fire extinguisher inside
Office Door/Inside - pictures inoffice, corkboard outside
Office Window/Inside - safety station outside, pictures inside
The outside walls are just plain brown brick. I'd like to add some graffiti. If anyone has some ideas on how to accomplish this, I am all ears.
3" Walls
Inside/Outside walls
Door and Window
POSTS
I currently have 2-way corner posts and 3-way T's done, with the brown brick texture and the white cinderblock texture. I am going to redo these as the ones I mapped up are not robocutter friendly. Need to work on the 4-way posts, as well as all posts involving the red cinderblock 'office' texture.
More to come as I continue to work on this
