Hi @ all!

This is my first post in this Forum.

And i wanna know, would you like when i convert Swamp Woods Village to TLX?
(sorry englisch is not my favor language *gg*)

here some previews from my first attempt.

Also i had two questions:
Look the picture with the arrows:

1: need anyone this black outline and the dots inside to fold the paper?
(this is a black line an there are dots over the line)
2: must this dots go along the whole side or only a few dots outside is ok?

Please be patient, this is my first, not ready, attempt.
The gridlines are for sample, i can also use naturally looking, like field/gras or anything others.
But it will cost time, think about 1 up to 3 weeks, i don't know how much time i can spend on the weekends.

with kind regard
scaredy cat

Welcome to the forums! And hitting the ground running, no less.

Those are guidelines, so unless you have another way of doing that, I would say leave them in.

Looking forward to more posts/pics!

Welcome!

As for your questions:
The dashed lines serve a purpose and should stay. They extend beyond the piece to help visually recognize where to score and where to cut.

For the grid lines, subtle and natural is best, but make sure they can still be seen at the table. Check the original set for ideas.

That being said, by default complete conversions are not encouraged for a few different reasons. Keep that in mind.

Good luck!

Good evening!



I only wanna convert the groundtiles to use them with "Hinterland Forests".

Here are my new version of dashed lines, like the original.

Please say if this ok now or not, so i can change before i start.
(maybe change color to grey? but originally it's white)


with kind regard
scaredy cat

Hi everyone!

Here is my work from this weekend:
It's the tiles without the grid lines.

Info:
The original tiles have 7" and 2100 pixel x 2100 pixel
this is now reduced to fit the Hinterlands to 6" and 1800 pixel x 1800 pixel

I don't know what kind of grid lines i take for them,
will see it maybe next weekend,
any help or suggestion are welcome.


with kind regards
scaredy cat

Looking good - TY

CS

Hi everybody!

Here comes another photo update, it's only the details
I redraw all the dots and lines inside completely new.
So there is no white or grey shadows or ghostpixels like my first try.

For outside i use the original kitbash.


good evening @ all

with kind regards
scaredy cat

hi!

Next update: i choose fog as grid line.
As you can see on the left side, the right side is original.
So i must use overall a little bit fog at all tiles, hope it will work.



with kind regards
scaredy cat

That fog-line is a very interesting effect. Not noticeable unless you're looking for it. Very nice.

That's really cool! You might want to make it a bit brighter though if you plan to submit it as a kitbash as lower end printers might not make it as distinct.

I am digging the fog!

Very nice! I'm jealous - if I did that, it'd look like a 6-year-old finger painted it. Keep it up!

Hi @ all!



Thank you i know the problem and i hope i can solve it
I use different layers in Photoshop, so i can always change
any layer in brightness or darkness also i can show or hide some of them.

Very usefull!


Look at the pictures:

1. it got more brightness to show it can be made
the other one was at 50% now this is 100%
if this will not enough i can duplicate the layers

2. the different layers (named in german my country language)





Me too




Thanks, no need to be jealous.

I needed yesterday six hours to learn how to paint this fog.
And i had many websites to read and a lot of layers
to delete before i can show you this.

--------------------------------------------------------------------------------------------

For now i can only say i will work on it,
and there are no release date,
but if it finished i will send it to you.


with kind regards
scaredy cat

That looks like my Flames of War army list

CS

Hi CS!



I hope I have not misunderstood it now, and so I need to clarify right now:


You may be right, because i don't know your flames of war.
And i use some brushes from the internet,
but i always use only free brushes.

Look here, this is my minimum for using it on this works:

Licensing details
You can make a work with these stock and sell it if you want.

or:

Licensing details
The creative work featured here - entitled ” ******* ” - is licensed under the Creative Commons license and can be used for personal and/or commercial purposes.


And if you have a fog brush and just look at it is not too hard to make their own similar.
Sometimes better sometimes not


with kind regards
scaredy cat

I think you misunderstood
Flame of war is a miniature game, not a photoshop brush...

I'm also jealous of your foggy grid. That´s a great work.
If you intend to submit this as a bash, remember to also include the 1.5" grid
Keep up the good work !

adding my +1 to the mist like. Very nicely done!!!

Hello!




Thanks for telling me.
I don't know that game, but now, i try to see in google for the game.


@ Colonel Shofer that was a mistake by my side, sorry




Thank you!



I know, this what you see here is only a sneak preview,
i want to know how you like it,
so i can change my way when needed.



I will give my best


Nice day!

with kind regards
scaredy cat

One small question:

Does the transition tile with river lines up properly with river tiles from Hinterlands TLX?

And thank you for doing this fantastic work.

Hello!










and




Please look the two pictures, so you can see,
that it will be ok, for playing.....for me at least.

Maybe, if I have too much time I'll have a look again more precisely,
but I do not think it is really necessary.

The work to the grid lines and the fog make me worry more........


Nice day!

with kind regards
scaredy cat

hello!

I would prefer the new style what do you think?

Picture 1 +2 = new style
Picture 3 = old style

I think picture 3 is far too linear, picture 1 or 2 is a little more realistic.

Now is your feedback asked


nice day!


with kind regards
scaredy cat

1 is the best I think. Thin but clear, present but not obvious. From a distance you could almost mistake them for waves which makes them perfect in my book.

Hehe ... no problem Scaredy, it was a little joke

Great work on the tiles, BTW, keep it up !!!

CS

1 looks awesome!!!

1 looks fantastic!

Hello!

Here are the latest pictures of my attempt to adapt the grid lines.

First form a grid line and there, individual parts are cut and processed individually.

Place and then finished sounding, easier said than done .....

It goes on slowly but surely.



Nice day!

with kind regards
scaredy cat

I'd say that's too thick, scale it down a bit so the lines are thinner.

Really what you had going on here was pretty much perfect:

Hello!


Thanks for your feedback!


Here some new photos.

I must test a lot more to find the right one...



Nice day!

with kind regards
scaredy cat

You know, this foggy grid thing would be fantastic for making a Blood Bowl pitch for Dark Elves or Undead. Good Job.

Better but still could be thinner. Also too bright now, more transparent would be better.