| WorldWorksGames http://www.worldworksgames.com/forum/ |
|
| Garage door track kitbash http://www.worldworksgames.com/forum/viewtopic.php?f=19&t=6561 |
Page 1 of 1 |
| Author: | Luckyjoe [ 09-10-2008, 02:01 PM ] |
| Post subject: | Garage door track kitbash |
Hi, all. I'm getting ready to build the garage door track kitbash for my Mayhem garage. I'm wondering if anyone has any current pics that show some detail on building it? I searched for old posts but only came up with some pic links that don't work anymore. Can anyone help me out? Luckyjoe |
|
| Author: | Luckyjoe [ 09-25-2008, 08:42 AM ] |
| Post subject: | |
| Author: | vampifan [ 09-26-2008, 01:13 PM ] |
| Post subject: | |
Lucky Joe, this is not an easy kitbash to make. I have used it in my build of the Mayhem Garage but I am certain it is not in the way the creator intended. There are two bars at right angles to the main frame. I had no idea what their purpose was so I cut them off and used the L-frames upside-down i.e. with one edge perpendicular to the sides of the garage door and the other edge perpendicular to the roof. My door does roll up and down and when in place hooks in place to the two door slides via a thin strip of card slightly wider than the width of the door opening that I stuck to the very top of the garage door. It took some figuring out to make it work. Photos would show you much clearer what I'm talking about but I don't own a camera yet. I will be getting one for my birthday in November and after I figure out how to work it and post pictures I'll be supplying lots of pics to the forum. I know this isn't much of a help at the moment so perhaps someone wiser than me can advise you better. I should point out that I glue all my models to mounting card (very strong card just over 1mm thick) which I found immensely useful in building such a fiddly piece of gear. This is one kitbash that definitely should have come with instructions. |
|
| Author: | Luckyjoe [ 09-27-2008, 04:10 AM ] |
| Post subject: | |
| Author: | namemein [ 02-07-2009, 05:36 AM ] |
| Post subject: | |
Hi. Im trying to build up this kitbash for the mayhem garage, but unfortunatly I am just not clever enough.  I ve absolutly no idea how to apply it on the model, so: is there anybody who can make some screenshots of the constuction steps (or his/her personal applying method)? 
|
|
| Author: | Luckyjoe [ 02-07-2009, 08:03 AM ] |
| Post subject: | |
I'd like to help you out but I never was able to figure that bash out or find a way to use it. I ended up just giving up on it. Tiny waste of money, big waste of time. Good luck with it. Luckyjoe |
|
| Author: | Arabin [ 03-04-2009, 04:31 PM ] |
| Post subject: | |
Sorry for the seriously delayed response. I tracked down the images they were originally on Sawhat's post. They are below: Garage door closed: Garage door open: Garage door inside: Garage door inside, close up: I hope that helps. Arabin |
|
| Author: | Luckyjoe [ 03-04-2009, 06:51 PM ] |
| Post subject: | |
Wow, Arabin, thanks. Those are great pics. I still have the pieces for the kitbash cut out somewhere. These will be a great help.
Luckyjoe |
|
| Author: | namemein [ 03-14-2009, 12:44 AM ] |
| Post subject: | |
Great! With this pictures im quite sure that I can build up this Garage door kitbash. Thanks. 
|
|
| Author: | Luckyjoe [ 03-14-2009, 08:59 PM ] |
| Post subject: | |
@Arabin: Thanks to the excellent pictures you posted from Sawhat's post, I was finally able to finish my garage door track kitbash build. Woot! @Namemein: If you need any help, I'll be glad to describe how I did my build of this bash. Luckyjoe |
|
| Author: | Arabin [ 03-20-2009, 07:52 AM ] |
| Post subject: | |
Excellent. Glad I still had them to share. I always try to save the images from kitbashes as the instructions are usually limited. Arabin |
|
| Author: | DeltaIce [ 03-20-2009, 08:23 AM ] |
| Post subject: | |
Hey Arabin, you wouldn't still have pictures of Pixie's bash of Battleships using items from First Light, do you? I found the thread but most of the pictures aren't there anymore. I probably am not remembering the exact name of the game. It had cards that you laid out to configure your ship. |
|
| Author: | Arabin [ 03-25-2009, 09:11 PM ] |
| Post subject: | |
I wish I had those Battlestation kitbash images. I remember following that thread avidly, but unfortunately I didn't save the images from that one. Hopefully Pixiefrog will return someday soon and repost the images. Have you tried PMing him? Arabin |
|
| Author: | DeltaIce [ 03-26-2009, 01:55 AM ] |
| Post subject: | |
| Author: | vampifan [ 07-22-2009, 08:10 AM ] |
| Post subject: | |
| Author: | Luckyjoe [ 07-22-2009, 11:56 AM ] |
| Post subject: | |
| Author: | vampifan [ 07-23-2009, 01:34 AM ] |
| Post subject: | |
Thanks for looking, LJ. Well spotted on the roof vents of the armoury. I'd forgotten all about them. They are indeed 3-D and couldn't be easier to build. Here's how. Cut out the vents from the roof very carefully. Stick them on top of a plastic counter and then stick that onto the roof. I get my counters from em-4 at http://www.em4miniatures.com/acatalog/Counters.html although you could probably find them in a craft store. The beauty of the counters is that you don't have to worry about cutting a perfect circle and they come in a variety of sizes and colours. I think the ones that I used for the roof vents were 12mm in diameter and they were white in colour. |
|
| Author: | anvil [ 07-23-2009, 03:07 AM ] |
| Post subject: | |
Looks great, how long did it take you? |
|
| Author: | Luckyjoe [ 07-23-2009, 05:25 AM ] |
| Post subject: | |
Wow, Vampifan. I love seeing your models. They are so very excellent. You definitely do go the extra mile, or three. Your garage door kitbash is beautiful. Did you use your mounting board technique to make the frame? It looks a lot thicker than cardstock. I've been taking your example to heart and adding more 3-D elements to my 15mm Mayhem build. Not the extra maile, more like another 100 yards. Going to try some push pins for roof vents/smoke stacks. Thanks for the inspiration.
What's up next? I'd love to see how you did the Shellendrak-based rowhouses. And thank you for the link for the plastic counters. Those look like they'd also come in handy for bases for 15mm minis. Luckyjoe |
|
| Author: | vampifan [ 07-23-2009, 01:42 PM ] |
| Post subject: | |
| Author: | Luckyjoe [ 07-23-2009, 04:40 PM ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|