So... If someone wanted to whip up some SwiftScenics based on Thoumonts or Friar sets, this'd be a good starting point for such a kitbash?
| WorldWorksGames http://www.worldworksgames.com/forum/ |
|
| ***RELEASED*** Deadfall: Tumbleweed Pass! http://www.worldworksgames.com/forum/viewtopic.php?f=3&t=11674 |
Page 1 of 1 |
| Author: | MelEbbles [ 10-01-2012, 10:40 AM ] |
| Post subject: | ***RELEASED*** Deadfall: Tumbleweed Pass! |
Designer(s): Product Description: Pricepoint: $6.50 WorldWorksGames's SwiftScenics product line turns down a whole new alley with Deadfall: Tumbleweed Pass! Think outside the box with the introduction of peaked walls and roofs, allowing you to build complete, standard style homes in just minutes! Choose between short roofs and overhanging roofs and connect them with additional roof ends and true corner roofs! Build any type or configuration of building in either 6"x6", 3"x3" or 6"x3" segments and stack up to any height! Add functional balconies or decorative awnings, corner caps, store fronts and chimneys! Use the optional foamcore mounts provided to make permanent structures, or just build the basics and when you're done for the day, take it all apart and store it FLAT! Saddle up, pilgrim, and start filling out that western townscape with Deadfall: Tumbleweed Pass! Deadfall: Tumbleweed Pass includes: 8 6" one-story peaked walls 4 6" two-story peaked walls 5 6" two-story walls 6" Wall toppers 8 3" one-story peaked walls 6 3" two-story peaked walls 8 3" two-story walls 3" Wall toppers 3"x3" peaked roofs with and without overhang 3"x3" roof ends and corner roofs 3"x6" peaked roofs with and without overhang 6"x6" peaked roofs with and without overhang 6"x6" roof ends and corner roofs 6"x3" peaked roofs with and without overhang 3"x3" flat roofs with internal supports 3"x6" flat roofs with internal supports 6"x6" flat roofs with internal supports 3"x3" optional foamcore mounts 3"x6" optional foamcore mounts 6"x6" optional foamcore mounts 5 optional decorative store fronts 5 optional decorative blank fronts Balconies Awnings Corner Caps Chimneys Plus, full robo-cutter support and fully illustrated instructions to guide you through the building process! Grab it here: |
|
| Author: | drewt333 [ 10-01-2012, 11:06 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
Grabbed. Printing, cutting and such will have to wait. |
|
| Author: | joydyhee [ 10-01-2012, 11:23 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
Awesome! |
|
| Author: | mproteau [ 10-01-2012, 01:28 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
So... If someone wanted to whip up some SwiftScenics based on Thoumonts or Friar sets, this'd be a good starting point for such a kitbash?
|
|
| Author: | Jaynz [ 10-01-2012, 02:01 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | greypilgrim [ 10-01-2012, 02:05 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
...nope - I think it is surely due assurance! |
|
| Author: | HighHanded [ 10-01-2012, 10:26 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
So close to the Swift Scenics product I'd actually want. But it's not fantasy. Well, at least the geometry is down. |
|
| Author: | Talae [ 10-01-2012, 10:28 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
This set has TONS to offer. I can't wait to see some builds from users. Now you guys need to get to building... |
|
| Author: | sdavies2720 [ 10-02-2012, 06:31 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
I'm half-way through (ok, maybe a third of the way through) a Maiden build, so this will have to wait for me 
|
|
| Author: | Jaynz [ 10-02-2012, 11:30 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
Yeah, these will be coming a little later for me as well, need to redo Beefy Chef today for submission, then finish the second mall board before donating it to Gamer's Haven, then finish Pegucci's... and THEN I'll get some of this built. 
|
|
| Author: | TheAuldGrump [ 10-02-2012, 02:42 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
Soon the streets will ring with the sound of blaster fire! (Fallout....) The Auld Grump |
|
| Author: | DeltaIce [ 10-02-2012, 09:02 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | drewt333 [ 10-03-2012, 11:27 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | mproteau [ 10-03-2012, 05:48 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | yazza [ 11-26-2012, 12:40 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
anyone can point me to anywhere for some of the roofs on this baby? cos this thing got me puzzled from time to time. especialle a corner roof thingie, roof ends etc, got no idea how to use them |
|
| Author: | mproteau [ 11-26-2012, 01:18 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | yazza [ 11-26-2012, 01:36 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
but what does the back hook to, thats not shown on the pic |
|
| Author: | mproteau [ 11-26-2012, 01:41 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | yazza [ 11-26-2012, 04:12 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
just had an epiphany and got it! the corner works with 2 pointy walls next to each other instead of opposed from eachother. one mystery solved 6"roof ends. the wall pieces to give walls a point i guess, but what are the rooftiled ones for? or are those the lookouts on top of the roofs? cos them having no window throw me off |
|
| Author: | CapnG [ 11-26-2012, 09:13 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
The roof ends are designed to sit in the middle of a regular roof section (not an extended roof, the kind with the overhang). See the building with the Undertaker sign in the bottom right corner of the promo pic posted above? Each consists of a peaked wall segment and a roof segment (both on the same page). You assemble them as you would any other roof and peak. That's it. They don't actually attach to anything, you just sort of drop them onto the roof and tuck the wedge along the bottom into the space between the darkened tab on the end of the roof segment and the lip of the wall. Make sense? If you're still confused, refer to page 10 of the instructions. |
|
| Author: | yazza [ 11-27-2012, 11:13 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
yep got that one. makign mine permanent for gaming nights in the club, seeing as they are not designed specificly for permanent build some gluetabs are missing. can easely cut them in if i want to but loving the kit so far, trying to knock out a simple table full for out malifaux tournament this sunday. |
|
| Author: | Zenguy [ 11-27-2012, 11:42 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | CapnG [ 11-28-2012, 03:28 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | Zenguy [ 12-03-2012, 12:44 PM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
| Author: | Skunkape [ 05-13-2013, 10:48 AM ] |
| Post subject: | Re: ***RELEASED*** Deadfall: Tumbleweed Pass! |
This is also a great looking set. I've so wanted some more western style buildings! |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|