WorldWorksGames http://www.worldworksgames.com/forum/ |
|
****RELEASED**** Himmelveil #1: Streets http://www.worldworksgames.com/forum/viewtopic.php?f=3&t=7276 |
Page 9 of 9 |
Author: | Spoo [ 09-04-2009, 06:25 AM ] |
Post subject: | |
I could see this being worthwhile for people with craftrobos, since cutting foam core would occupy all of their hand-cutting time. On the other hand, if you're cutting everything out by hand anyway, then also cutting foam core is not much worse. |
Author: | Ghenghis_Ska [ 09-04-2009, 07:53 AM ] |
Post subject: | |
Author: | Kane [ 09-04-2009, 08:04 AM ] |
Post subject: | |
Author: | Qpony [ 09-04-2009, 10:03 AM ] |
Post subject: | |
Hey all, I am currently talking to a couple of internet places that can do machine cut of custom shapes for foam core. I sent them the terrain linx mounting PDFs and gave them a (very) large number for the following cuts: 150 7x7 (for legacy cuts) 450 6x6 100 3x6 100 3x3 350 1x1 and 7/16th on an inch (linx tabs) Because they are using a machine they should be able to cut the foam core into the terrain linx shapes (no additional foam core cutting required). I'll shop around and let you know what the cheapest price. From my perspective foam core is the last piece of the puzzle for making me never have to cut anything out ever again (especially since foam core is really hard to cut and dulls my blades really quickly). |
Author: | Talae [ 09-04-2009, 10:14 AM ] |
Post subject: | |
What is a rough price for something like that? |
Author: | doubleored [ 09-04-2009, 10:30 AM ] |
Post subject: | |
Author: | Riley [ 09-04-2009, 12:34 PM ] |
Post subject: | |
Author: | Gamesmith Denny [ 09-04-2009, 08:10 PM ] |
Post subject: | |
Author: | TheAuldGrump [ 09-04-2009, 08:27 PM ] |
Post subject: | |
Author: | Vertrucio [ 09-04-2009, 09:47 PM ] |
Post subject: | |
Author: | Qpony [ 09-09-2009, 06:30 AM ] |
Post subject: | |
I posted in the TLX forum about the foam core custom cut. A company I spoke to can do it, the only hitch is that there is an initial start up cost (to make the die). I can shoulder a lot of the cost but it would be great if I could split it between a bunch of people. Please see the TLX forum for more info. Denny: I emailed you re: this, let me know if I should stop pursuing this. Thanks, |
Author: | Gamesmith Denny [ 09-09-2009, 10:03 AM ] |
Post subject: | |
Author: | TheAuldGrump [ 10-16-2009, 10:25 PM ] |
Post subject: | |
Author: | Gamesmith Denny [ 10-17-2009, 11:02 AM ] |
Post subject: | |
Author: | Talae [ 10-17-2009, 11:53 AM ] |
Post subject: | |
Author: | Xsara07 [ 10-17-2009, 12:21 PM ] |
Post subject: | |
Author: | TheAuldGrump [ 10-17-2009, 12:28 PM ] |
Post subject: | |
Author: | Gamesmith Denny [ 10-17-2009, 01:08 PM ] |
Post subject: | |
Author: | TheAuldGrump [ 11-04-2009, 09:19 AM ] |
Post subject: | |
Page 9 of 9 | All times are UTC - 8 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |