| WorldWorksGames http://www.worldworksgames.com/forum/ |
|
| miniature scale matching http://www.worldworksgames.com/forum/viewtopic.php?f=3&t=9439 |
Page 1 of 1 |
| Author: | theran [ 03-14-2011, 01:27 PM ] |
| Post subject: | miniature scale matching |
I saw the thread on scales but did not answer for the game I use. Im doing builds for Malifaux (32mm) game and printing out at 100% appears too small. I saw some the pics on the site using thier figs so wondered what scale was used for them? |
|
| Author: | robby [ 03-14-2011, 01:49 PM ] |
| Post subject: | |
Most all figs featured are 25-28MM scale. |
|
| Author: | theran [ 03-14-2011, 04:58 PM ] |
| Post subject: | |
| Author: | Gamesmith Denny [ 03-14-2011, 05:10 PM ] |
| Post subject: | |
Welcome to the forums Theran! All scenery in the promos is in its native unscaled format. Most Malifaux sculpts work just fine with our standard scale ( suitable for 28 to 32mm sculpts). One thing to be careful of is that you've got "print scaling" and "fit to page" turned off both within your printer software settings and within Adobe Reader. A VERY common mistake is to allow software to scale the terrain as it attempts to "fit to page". Good luck and if you have any other questions be sure to let the gang know in the "Tips & Tricks" section (great info there): http://www.worldworksgames.com/forum/vi ... um.php?f=1 |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|