Hello all,

I decided to add the Arena to my gamaing arsenal and what a fine thing it is!





I did run into the issue of the card drawer catching on the way through...

Luckily I found this during a dry fit:



so I came up with the following solution:



By gluing these runners in place through the middle it made things much smoother.



It was a pretty simple Bash, I just printed 2 extra "floor tiles" and cut a 5cm strip off each edge, scoring at 2.5cm and finally trimming off the two end sections to an approprate "T" shape - I throught that since space is at a minimum it best to have as little narrowing as possible.

It also made things a bit tighter, but I have found as long as there are cards in the tray it works perfectly.

But without cards the back wall of the tray tends to roll up and into itself.... even with the base strengthened with 210 GSM backing board, I am still working on a solution to that in my head... maybe some kind of stoage box insert *ponder*

Anyway, hope this helps people thinking about constructing one of their own.

You can see more in progress shots here: https://picasaweb.google.com/haden.park ... directlink

Sorry about the quality of the pics, only had a cellphone camera to hand.

Actually thinking a bout a Storage box to relpace teh card tray myself. I don't have much need of cards. but somewhere to store exta pencils, markers, tokens what not would be very useful. Also thinking making a third level could be interesting.


(times like this I wish I had a robocutter)