| WorldWorksGames http://www.worldworksgames.com/forum/ |
|
| Cutfiles in PDF or BMP http://www.worldworksgames.com/forum/viewtopic.php?f=62&t=12196 |
Page 1 of 1 |
| Author: | KyleB [ 05-18-2013, 03:53 PM ] |
| Post subject: | Cutfiles in PDF or BMP |
Hi all, I have a friend who has a laser cutter. We got it up and running and it does a nice job. I don't really want to go and buy my own mat cutter if I can just use his. The problem is that it wants to print from a BitMap (BMP) file. From reading around the internet I thought I would be able to print to PDF from Silhouette Studio but I only get the registration marks and none of the other lines. Does anyone have any idea why, or another way to generate those file? Thanks, KyleB |
|
| Author: | mproteau [ 05-18-2013, 05:06 PM ] |
| Post subject: | Re: Cutfiles in PDF or BMP |
Check out the second post on . You can make the Studio software print the cutlines. But, does your laser cutter actually align with the reg marks? If not, you make have a hard time getting the cut lines to actually line up with the printout. |
|
| Author: | KyleB [ 05-20-2013, 08:44 AM ] |
| Post subject: | Re: Cutfiles in PDF or BMP |
Wow! That was so easy! Thanks a bunch, I had searched all over. Thanks for this forum. The only thing I had to add was a line thickness of .25, mine was set to .00. Thanks again, KyleB |
|
| Author: | joydyhee [ 05-20-2013, 08:49 AM ] |
| Post subject: | Re: Cutfiles in PDF or BMP |
Welcome KyleB! Good luck with your cutting and I hope to see some of your builds posted. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|