| WorldWorksGames http://www.worldworksgames.com/forum/ |
|
| Error in GSD-File Hall-Arches Lost Halls of The Dvarven Kink http://www.worldworksgames.com/forum/viewtopic.php?f=62&t=9615 |
Page 1 of 1 |
| Author: | hjmaier [ 04-19-2011, 01:36 PM ] |
| Post subject: | Error in GSD-File Hall-Arches Lost Halls of The Dvarven Kink |
Hi, could you look at the GSD-File I mentioned? The 2 Arches at the top of the sheets are not cutted correctly. The dwarven head is incorrect. There is a cut missing and a bit below there is a cut too much (a bow line). Best regards hj |
|
| Author: | Nickydude [ 04-19-2011, 02:10 PM ] |
| Post subject: | |
| Author: | ehisey [ 04-19-2011, 02:33 PM ] |
| Post subject: | |
| Author: | hjmaier [ 04-19-2011, 03:17 PM ] |
| Post subject: | |
| Author: | Redcrow [ 04-19-2011, 09:46 PM ] |
| Post subject: | |
| Author: | hjmaier [ 04-19-2011, 11:09 PM ] |
| Post subject: | |
Yes, doing the same thing now too. The GSD-File from the dwarve-standees are wrong as well. |
|
| Author: | Zenguy [ 04-20-2011, 01:05 AM ] |
| Post subject: | |
While I haven't tried these on a cutter myself (not having one), I hadn't heard there were problems with these GSDs. You might want to check you you printed the pages with scaling set to None - changes to the print scaling can throw the cutting off. |
|
| Author: | hjmaier [ 04-20-2011, 01:19 AM ] |
| Post subject: | |
The scaling is fine. There are simply a few cut lines wrong. I fixed them by myself. But it should be also fixed in the download file for other customers. |
|
| Author: | Zenguy [ 04-20-2011, 01:42 AM ] |
| Post subject: | |
| Author: | ScrubKai [ 04-20-2011, 04:23 AM ] |
| Post subject: | |
| Author: | hjmaier [ 04-20-2011, 04:54 AM ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|