WorldWorksGames http://www.worldworksgames.com/forum/ |
|
How do I scale "Lair of the Dragon God TLX" for 54mm minis? http://www.worldworksgames.com/forum/viewtopic.php?f=65&t=12822 |
Page 1 of 1 |
Author: | yvs2010 [ 02-26-2015, 10:47 PM ] |
Post subject: | How do I scale "Lair of the Dragon God TLX" for 54mm minis? |
Author: | DougT [ 02-27-2015, 04:36 AM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
If you figure that WWG terrain is scaled for 28mm miniatures you would have to print the WWG terrain at 193% to get it to match 54mm miniatures. The size you want the terrain to fit: 54mm divided by the size terrain you have: 28mm 54/28=1.929 which would be 192.9% rounded up to 193%. A big problem would be the maximum size page you can print on since each of the rescaled terrain pieces will be almost twice the size of the original. You will either have to print on larger card stock or split some parts between multiple pages then re-attach the split parts to make the whole part. The current version of Adobe Reader and Foxit Reader have a custom scale feature where you can input a % to print. |
Author: | yvs2010 [ 02-27-2015, 10:32 AM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
Author: | Ninevah [ 02-27-2015, 11:34 AM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
Man, the TLX wrappers barely fit on 8.5 x 11 as they are. Increasing them more than a few percent would mean splitting them out to multiple pages or changing the design, I would think. |
Author: | yvs2010 [ 02-27-2015, 04:31 PM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
Author: | yvs2010 [ 02-27-2015, 07:27 PM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
The only concern I have is the length of the 6" tall walls. They seem to only come in only one somewhat short length. So if I want to make big rooms, can I link two or three of these walls together side-by-side with the pillars (that naturally form when connecting them) holding them together? I know this might not be as "clean" of a look as the longer 3" tall walls, but will it still work? |
Author: | yvs2010 [ 02-28-2015, 04:18 AM ] |
Post subject: | Re: How do I scale "Lair of the Dragon God TLX" for 54mm min |
Okay, I am looking at another option. I can buy the Epson WorkForce WF-7110 Wide Format Inkjet Printer and 13" x 19" 110lb cover stock. I need to buy a color printer anyways since I don't have one. Would that be large enough to create my dungeon at least 50% bigger (maybe 100% bigger) than normal with ease? Would I run into any other problems? |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |