Okay, all! To kick off my official status as the WWG Kitbash Guru (yeah, I've had the title for a while, but now I've got access! Muahahaha!... Oh. Sorry, Denny. ), I've uploaded three new kitbashes for your enjoyment!

---------

First is DNA's long awaited ! This is the perfect addition for those who want to spice up the overhead view a bit, and add some variety to the skyline!



---------

Second, we have Saw Hat's ingenious ! A great bash that lets you drive your cars right into the garage, and gives you that extra bit of realism!



---------

Third up is Sirrob01's ! With CWU's first official bash, your true 1" castle dreams are that much closer!

Bring 'em on!

I'll be uploading a minimum of three a week, until I'm all caught up! And if all goes well, I'll have to step that up to match the veritable flood of kitbashes that will be bursting my email box!

A bit melodramatic, you say? What if I told you that we have no less than twelve kitbashes from Andorax alone?

Trust me, folks, there's a ton of goodies on the way!

Excellent! Thanks to the Kitbashers, to Aleph, and of course, thanks Denny!

Finally the garage bash will be mine...

Arabin

Actually, may I make a suggestion? If you are going to be adding a lot more kitbashes, could the files be organized (under their model set category) by the date they were made available? Currently they are alphabetical and it's already getting awkward to find the new stuff if you are browsing.

Cheers,
Arabin

I couldn't leave well enough alone for tonight, so here's more!

Bob Cooper (Andorax) has a ton of 'em, so I thought I'd start it all off with his ! This bash allows you to have a same-height corner to your low-walled arenas (not an option previously)!



---------

Next is Bob Cooper's ! This kitbash creates a simple connector to allow joining two dungeonworks floating walls together at a corner seamlessly!



---------

Last for now is Bob Cooper's ! Sometimes, you just plain have to have a fiery pit, be it to threaten characters with, or to have your fiendish foes rise up from within.

I was taking a look at both the Barrel Roof and the Garage Door Track, and neither one had any instructions. I know the older kitbashes all required at least a word document explaining things.

It would be really helpful if something could be included next time, even if it's just photos to show how it should look from different angles. The barrel roof is pretty straight forward, though it would have been nice to include a finished model image.

For the garage door though, I had to take a look at Sawhat's gallery and save all his photos for reference.

Just an idea...

Arabin

Cool, thanks guys. Could there be a patch for those of us that have already downloaded the file?

Arabin

Instructions for the barrel roof

1. Cut/score/fold/glue 2 "edge" pieces (the straight box).
2. Cut/score/fold/glue 2 "front/back" pieces (the bigger box). Don't forget to cut out the white square.
3. Glue the ends of the "edge" pieces and insert them into the cutouts on the "front/back" pieces.
4. Glue the end tabs to the underside of the edge pieces. The vault part of the roof will naturally pop up.
5. Cut/score/fold/glue the supports (if you use them).
6. Enjoy.

Nah, copying and pasting is fine I appreciate the info, and sorry I notice these little things... keep making your life difficult...

Arabin

Wheeeee!!! It's another week chock-full of kitbashing goodness! This one's dedicated to the athlete (wannabe or actual) in all of us...

Courtesy of Bob Cooper (our very own Andorax) comes the UGE (so big it couldn't fit the "H") !

First things first. You can't have any spectators if you don't have ! This kitbash comes with Metal and Wood versions.



Now for the Sports! We've got a , where you can create just the infield, or the whole darn thing! You'll need VillageWorks for the Grass & Dirt tiles.



There's a , for use with Bits of Mayhem (Basketball Hoops, Concrete), and either Mayhem Armoury or InteriorWorks Pubs & Inns (Wood Floors).



Ever want to compare something in-game to the size of a ? Here's your chance! This beast comes with plans for US & Canadian versions of football, and needs VillageWorks for the Grass. There's also grass letters and a goal post! Go Mayhem Marauders!



For those of you who think Footballs should be round, we've got a , too! You'll need VillageWorks for the Grass, but the goal is included!



Next up is the only kitbash in the Sports Series to be fully standalone: the ! It comes in 1" grid and gridless versions, and it also comes with a net!



Rounding out the Sports Series, we've got a ! You'll need Mayhem Armoury or InteriorWorks: Pubs & Inns (wood floors), VillageWorks (grass), or SeaWorks: Legend of Skull Cove (sand). Bump, set, and spike!



---------

And finally, to reward those of you who have read this whole thing , here's the latest installment of Bob Cooper's Encounter Challenge!

Starring the Himmelveil HarborMaster, is free to download! Thanks to the following authors for their hard work!

>The HarbourMaster's Office - Lostearthmother (none)
>Attack of the Night Horror - Maxstyles (none)
>Trouble Brewing ion Himmelveil - Kevin Andrew Murphy (D20 Fantasy)
>Fury of the Ovaettr-Elgr - Andorax (D20 Fantasy)
>Encounter at Londinium Docks - Thomaso827 (Flintloque Encounter)

This week we have a bunch of long-awaited forum favorites!

First up is Curt Voiles' ! This is one small part of Curt's amazing Skull Temple Over Hellmount build, and a very nice addition to any cliffside that you want players to be wary of.



Next is Hot4Darmat's ! The perfect way to give any ship a confined and industrial feel! 3D and 2D versions are included, so you can choose how to flesh out your ship.



And, we have Deathreaver999's ! If you're looking for a bit of variety in magic symbol colors, this is the way. Do the different symbol colors represent something? It's up to you to decide!

This week we've got another long-awaited fan fave, and a couple from Bob Cooper that would be fan faves, if he ever gave you guys a sneak peek before submitting them!

First up is Hot4Darmat's ! Hot4Darmat puts it best: "What could be more fun as a DM, than scaring the Bajeezus out of your party? Haven't you always wanted to see your players turn pale, cast furtive glances around the shadowy room and ask for their Mommies?"



Next is Bob Cooper's ! These are a great way to add a bit more panache to your dungeon, castle, or cave. They wrap around existing hexagonal columns, and can support minis when the bottom is glued down!



Finally, there's Bob Cooper's ! How long have your players been in need of this one? Even heroes gotta go at some point... This is also a humorous (or cruel) way of separating party members!

Through the sheer power of peer pressure , I've gone and uploaded Bob Cooper's vision of Suburban Mayhem!

Everything you need to build tract homes, complete with alleys and a huge variety of siding can be had!

You can build one, two, or three story buildings, and even have them with peaked roofs!

We've got three different Flats kitbashes, in the style of Bits of Mayhem, and each one has four different colors!

First is ! You can make huge buildings or suburban homes with these four colors of siding: white, tan, brown, and grey.



Next is ! For those neighbors' homes, you can use these four colors of siding: pale blue, dark blue, dark green, and dark red.



For extra variety and spice, there's ! Included is three styles of grey cinder walls: dark, medium, and light. Also included is a plywood flat! You can make a whole building in construction, and you can even cut out individual pieces to board up windows and doors!



To tie everything together, you've got to have the ! There's sidewalk-lined alleys, dirt-lined alleys, and driveway entrances to match. For the suburban home layout, all of the plans are in here, too! Start with the alleys, pick at least one of the siding sets that suits your 'burb, and start building!

Very cool, purchasing in another browser window even as I type this

Arabin

This week is yet another of Bob Cooper's ambtious themed kitbash series: Hexagonal Columns! Bob went and used the geometry of the CaveWorkd and DungeonWorks Classic Hexagonal Columns, and bashed textures from every genres and almost every set! The man went mad, I tell you!

First up is , featuring textures from DungeonWorks Classic, DungeonWorks Gothic and Chunky Dungeons!



The next set is , featuring textures from CastleWorks Classic, CastleWorks Ultimate, and ArenaWorks!



Third is , featuring textures from Castles & Keeps, CaveWorks, Legend of Skull Cove, and the Himmelveil Harbormaster!



Next, with a twist, is , with textures from Platform Command: Operation Nightwatch, SpaceWorks: First Light, and Mars Station!



Last, and certainly not least, is , complete with textures from Mayhem Armory, Streets of Mayhem and Bits of Mayhem!

New this week, we've got some love for First Light, and Mars Station!

Hot4Darmat is at it again with his ! With thsi awesome bash, you can have integrated doors that slide sideways with only a bit of a thicker wall. The slide lever on one side looks like part of the wall, too!



We've also got another from the Paper Madman himself, Curt Voiles' ! Using the rock risers from CaveWorks, he's applied Mars Station textures to them to create a more varied terrain for your minis! He's also included a retextured Bridge, to cross over those dangerous areas.

We've got four of 'em this week!

Deathreaver999's very useful give us a way to extend those apartments upward! A wallpaper texture and a re-done original texture (with no posters) are included!



Another submission from Curt Voiles is next, ! There's seven pages of lava overlays for your Mars Station setup! You've got straights, corners, intersections, and origin pools!



Next is the first of a new series from Bob Cooper: ! This first (of four) installment gives you more camper shells for your trucks than you can find in any given lot! Small and large sizes, and a huge variety of colors are included.



Part 2 of 4 is Bob Cooper's ! This one's a long-awaited way to add ambulences, police interceptors, and even a news van!



Next week is 3 & 4 of the auto parts series!

We've got no less than eight new kitbashes this week!

As promised, here's part 3 of 4: Bob Cooper's ! This has four different boxes to turn the Flatbed truck into a semi truck!



Part 4 of 4 is Bob Cooper's ! This one modifies the Flatbed truck into a full-blown (oooh, bad pun) tanker that has tags for Gasoline, Hazardous, and Milk!



A long time ago, there were pics for my own ! They're a reality now, with a fully tileable 7x7, a 6x6 pit, T, X, a 4x4 flow, and a 4x4 transition tile, to make it all fit together!



Deathreaver999's on a roll with his ! There's a gridless carpet, a 1.5" linoleum tile, and a 1.5" wood floor (gorgeous!).



Exploding_Youth lives up to his name, and explodes onto the kitbash scene with a whole series of Desert Tiles! Long asked for, and delivered in spades, he put together four packages of tiles for you to customize your needs. They all feature a fantastic desert scrubland theme.

First is his ! Three unique tiles give your wasteland expeditions much needed scenery.



Second is his ! Looks like these four pitted and grooved roads would be perfect for races or places way out of the way. Comes in Curved, Straight, T, and X varieties.



Third is his ! Great for those clandestine meetings at the fringes of civilization... Comes in Curved, Straight, T, and X varieties.



Fourth is his ! Looking for a way to go from the Streets of Mayhem to the desert? This one has five tiles to help go from one to the next, and back again. Comes in Desert to Dirt Road, Desert to Mayhem Street, Desert to Sealed Road, Dirt Road to Mayhem Street, and Dirt Road to Sealed Road!



Thanks, Exploding_Youth!

This week is all about Highland Piper and his love for Chunky Dungeons! A huge set of five pieces awaits...

First is his ! A great way to make those long diagonal hallways, and a more interesting aesthetic for your dungeon architecture!



Second is his ! Have you been looking for a way to use the Curved Wall in a corridor, but wanted a curved inner wall, too? Here's your solution!



Third is his ! A huge block of stone, the solid wall makes a nice wall terminus, and can double as a fallen block trap!



Fourth is his ! A great way to create extra room dividing walls on the other side of a corridor!



Fifth is his ! This is the perfect way to make four adjacent rooms with no gap in the wall. You can also use this to make some pretty twisty corridors!

This week sees one of the most anticipated modern kitbashes ever!

Yes, I'm talking about SawHat's ! He included instructions for multiple mounting options for extra versatility, too!



Next up is Deathreaver999's ! He's continuing his reign of modern kitbashing goodness with his second stairs set - this one's got a new brick texture, too!



We've also got more love for VillageWorks, with Bob Cooper's ! This set gives you three new building textures - one even uses textures from ArenaWorks!



Thanks, guys!