Currently building a 4 level Titan/Titan Command structure.
Used many things from my Waltzing Matilda build and need much more.

The encounter is at a Research station that over the last 50 years has been working on Terraforming a small planetoid. Communications has been lost for the past few days so our adventurers are sent there to investigate by the Scientific Compendium.
I have the two lower levels pictured a little here, I have started working on the third and fourth level. The fourth level is the ground level with a mix of Forest and titan tiles for the above ground access and landing area.

I used Double walls for my reactor level and made 5way posts but only made connectors for my 2way posts. I will post more pics as I complete the build out.
-Dennis

http://wormholegamer.com/photos/display ... =257&pos=0

Looks good. Nice to see the props from Celestus Pravatus and earlier sets doing such a good job of fleshing out the scene.

Thanks much, I have learned a lot from here in the forums and you guys as well just making the stuff.

I really like those props from the other sci-fi kits. Want to get the Platform Command sets as well. Some really cool props there.

Really looking forward to Streets of Titan.
-D²

I'd second that. For what you're doing try PC: Red Sector as it has a great set of props that will fit right in with your build, and the mech parts work well as props too.

Nice! I see a Topo model as well....

I like it! Well done! It looks like you can have a lot of fun with that set up.

Side note: I'm also a fan of some of Topo's stuff.

Very well done! I look forward to seeing the compled build.
But even what you have now warrents adding to the index thread

That is cool. Please do update it as you progress!

Thank you all for your comments.
I have been looking hard at Red Sector but back to a budget so am holding money for Streets of Titan.

The Topo model I had printed but not built, thought I would give it a go and am very pleased with it. Have a couple more to build for this encounter. Have a few pics from last night's work I will try to get edited and loaded up in between clients.

Thanks again for the comments on my build.
-D²

PS Was printing tiles out on paper tried some on card stack and am really surprised at the difference. Will now keep printing to card stock even though it pushes my cost up a bit bur the results are worth it for the long run. -D

I really like the "broken floors" It is something i have been thinking about doing.

Will there be more damaged sections?

Love the two high walls.

I got to admit a Titan Destroyed is starting to appeal to me more and more.

Looks good.
I also look forward to seeing the completed build.

http://wormholegamer.com/photos/display ... 2366&pos=0

Just got these re-sized and posted.
Not sure if I will get anything done tonight, hope to make some more walls to finish out the Personnel level, then on to the top ground level.
-D²

That's great - love the way you've used Hinterlands for that that "being reclaimed by nature" - really creative use of TLX terrain.
Definitely deserving of 5

Love it

Great build

Wow, thanks guys. -D²

@G_S- Yes I plan to have a damaged wall or two with another tile as the roof using the 3*6 cliff top from Hinterland Cliffs. Have the print out of the floor but need to make the walls, was going to just hack a wall up but now that I have pushed the encounter by two weeks I may see what I can do in Gimp.
-D²

If you own mayhem destroyed see if (and this also requires you to have a robo cutter) see if the GSD files for the destryed walls are close you could use the Destroyed GSD to cut the walls then use a marker to blacken the edges stress them etc...

If i ever make damaged walls that was going to be my first check to see if it worked.

I be poor, no robo-cutter here.
Would like to get Mayhem sets as well but don't own any of them. I am currently waiting for Titan Streets but may have to get one of the PC models.
I like the props a lot.

http://wormholegamer.com/photos/display ... &pos=-3077

New pics of the surface in design and concept. Still have a few things in mind to alter. Will ring the surface with walls from Cliffs and Forest with tiles made from the Mars Station ground tiles with the trails on them. These will cover the far side from the pics perspective. not sure if I will wall that side with an outlet.

-D²

Looking over Red Sector, I was wondering how tall is the Power core. I really do like the props there and can see many uses for them in the future. I could scale some of the Mecha stuff to make it more of Power armor sized than towering Mechs. -D²

It is pretty big

The Power core is huge, around 12" high.

Red Sector's mecha come in modular pieces that you combine as desired. They'll need shrinking for power armor. At normal size they look like they're off a spaceship or some other heavy equipment.

thanks for the info, wont get the Power core then for this build but for future builds I see it working out.

The mech pieces are that big cool, I can see some good possibilities for that. arg just time and $$ right.
-D²

No new pics, wrote on module instead of actual model work.
Have a good weekend all.

Yeah I knew the power core was pretty big, I have been toying with the idea of using it to make the Power core scene from the phantom meance (or one similar) I think that would be GREAT with th TLX system.

man would it ever! I really like your barge. I hope to see your rendition of the Power Core form a SW setting. You work really reflects the SW Universe, really good work man.

With it that large I will use as a center piece in a future encounter with a drifting Dreadnaught. Want to use a lot of Matt's skins from Prevatous (sp ). A group I am a player in would like a Cthulhu slant SciFi so I am already seeing stuff in my minds eye. So may start with normal scifi leading to more and more Other Realm/Cthulhl encounters further and further away form settled systems.

-D²

Got it finished out and ready for play this week end. On a slow network so will post pics next week. Really pleased with the over all turn out. -Dennis

Is it just the camera, or is everything a slight shade of green? Gives it a good 'slum' look, some place even Stormtroopers would be bummed to go to ;)

Not the camera, every thing is a slight offset to green for that grungy icky feel.

Well no pics to add as my Cat decided to jump into the center of the build while I had it under cover while the players were bringing the lander into the atmosphere.

Needless to say I was surprised at how well it did survive. Only one tile is useless and will have to be re-skinned, three posts had to be repaired with tape so I could move the game on a bit, and several of the post connecters have to be re-glued to tiles. Made a quick rebuild to play a bit but need to do the repair work this week, I will take before and after pics.

All the props survived which really surprised me. I think two thing helped the build surviving; the speed mount level which is the personnel level and is 1'X2' sheet of foam core and my quick reflex to grab him as he landed on the model. I love my cat but oh how I was P*&^%sd , no cat abuse occurred though he did run to his corner in my bed room and stay there the rest of the night. Argg, oh well, life goes on. -D²

Well here are some pics, was able to make a few after my quick patch up so we could continue the game. Most damage were slightly lifted post mounts, two posts destroyed and one tile gone, a few tiles with scratches. Here is the culprit viewing some of his handy work.


Here are the other pics before my repair, my camera just broke so do not know when I will be able to make any more pics and post that will be of note.













As you can see my walls now are a bit wonky due to the cat attack and posts not holding tight to the tiles. Ah the joys of having a fury friend who is curious and must help with everything. -D²

That is one nice build. The mix of sets work nice with each other.

Argh, you've got me wanting to TLX mars station now.... Nice build I like the mars station floor tiles.... I'll have to borrow that.